As users' demand for LCD splicing screens has increased over the past few years, the demand for its accessories has also increased. In most LCD splicing large screen projects, the maintenance methods of the splicing screens are mainly divided into front maintenance.
Front maintenance splicing video wall bracket
One of the more common installation methods is to directly fix the hydraulic bracket on the wall. Front maintenance means that the screen can be maintained, repaired and maintained in front of the screen.
The primary purpose of front-maintenance equipment for LCD splicing screens is to solve the space problem. This equipment eliminates the need to reserve maintenance space behind the screen. Technicians can pop up the large screen directly in front, whether it is the early equipment or the Later maintenance and inspection can be performed directly from the front, thus reducing the time and complexity of equipment and after-sales service.
iSEMC's front maintenance bracket allows each LCD splicing screen to be popped out and pushed in after being gently pressed, which not only does not affect normal use, but also allows for all aspects of maintenance. Usually when users consider space saving when building a large-screen display system, they will also choose to install a hydraulic front maintenance bracket.
Features of the front maintenance bracket:
Each splicing unit can be freely ejected and recycled from the front, and is completely installed and maintained from the front;
The frame should be thin to reflect the “thin” characteristics of the LCD screen;
The front, rear, left and right, and height of the splicing screen can be fine-tuned to make the surface of the splicing wall smooth and beautiful;
It is simple and convenient to use, no special customization is required, and it can be spliced at will.
Advantages of front maintenance bracket:
STRONG STABILITY
Frame-type enhanced stability, avoiding down expansion
SELF-LOCKING
High-quality self-locking accessories, sound prompts for closing and popping
CUSTOM HYDRAULIC ROD
Customized hydraulic rods according to demand, optimal performance
PREVENT FALLING OFF
The screw is locked to prevent falling off and increase safety.
DISPLAY MODULARITY
Support display modularity allows video wall assembly in an unlimited number of configurations
Comparison between hydraulic front maintenance bracket and traditional wall-mounted bracket
Structural comparison:
Traditional splicing wall structures are customized products and cannot be replaced for two times. If the splicing screen is updated, the structure will need to be completely re-customized and installed; the hydraulic front maintenance bracket is a standardized product that supports multiple replacements. Supports multiple splicing screen models of the same size without changing the structure.
Space comparison:
Traditional splicing walls need to reserve maintenance channels to ensure maintenance operations and increase the cost of space use; choosing hydraulic front maintenance brackets does not require reserved maintenance channels, and front-facing maintenance operations can maximize space utilization and save space use costs. .
Maintenance comparison:
Traditional splicing wall maintenance requires disassembly and maintenance from the top, requiring 2 or more people to perform maintenance, which increases maintenance costs, difficulty and risks; the hydraulic front maintenance bracket is used for completely independent front maintenance, without removing wires and accessories, only One person can perform maintenance, saving maintenance costs and reducing maintenance risks.
Wire comparison:
Traditional splicing wall wiring needs to be routed from the bottom to increase the wire distance and attachments; hydraulic front maintenance bracket wiring is selected to support directional wiring, effectively shortening the wire distance and reducing attachments.
Final thought
The advantages of hydraulic front maintenance splicing screens are mainly to save space, maximize the utilization of environmental space, and reduce the difficulty of later maintenance work. Therefore, if the LCD splicing screen needs to be wall-mounted, it is still recommended to use hydraulic front maintenance installation. The cost is not much different, but it will reduce a lot of costs for future maintenance.
